What precautions should be paid attention to when using high energy igniters? Let's introduce Xuzhou Jieneng Electric Power Equipment Co., Ltd. to you.

1、 When using a touch wire to connect the igniter and the nozzle, make sure that the electrodes on both sides of the cable are closely and reliably touched between the igniter and the nozzle electrodes. Otherwise, it is likely to damage the electrode connection or igniter.

2、 The high-energy ignition device is a unique design scheme based on the time and intermittent working hour system. After a continuous tantrum for 30 seconds, it is important to terminate the ignition for 60 seconds before starting the ignition again, otherwise it may cause damage to the ignition device components.

3、 "High energy ignition. When the output port of the device rejects the nozzle, it is prohibited to plug it in to prevent damage to the components.".

4、 High energy ignition. The device is 20 joules and the voltage is 2500 volts. It is important to have a good grounding system during installation.

5、 When the host power is connected, the normal status light should be on.

High energy ignition device has many advantages such as large flame kinetic energy, strong self-cleaning ability at the end of temper tantrum, fast ignition, use of imported component nozzles, resistance to slagging, long service life, no harm from air pollution, and convenient application and maintenance.

Routine maintenance of high energy ignition device:

1、 When the electric nozzle is not started, it is necessary to withdraw from the flame area to prevent its burning, deformation, or damage.

2、 Prevent the internal structure of the igniter from water seepage or excessive moisture and cold, and timely clean up excessive dust accumulation.

3、 The conductive rod and electric nozzle are insulated with high aluminum porcelain, and it is prohibited to fall or collide to prevent damaging the insulating layer components and endangering the application.

4、 The surface layer of semiconductor material nozzle shall not be touched by hands during operation.

5、 In the event of a successful ignition, each power-on time should be reduced to increase the service life of the igniter.